Cutting Steel Turning Parts
- PRODUCT DETAIL
In addition to copper turning parts, stainless steel turning parts, aluminum turning parts, our company also produces a variety of quick-cut steel parts. These carbon steels include:
 Quick cut steel 12L14Environmental protection iron 12L15 Carbon cutting steel 11L44 Medium carbon steel 45# and so on The left picture shows a representative carbon steel type turned part of our company. Its surface has been blackened and oxidized. Common carbon steel turned parts are surface treated to prevent rust. : Galvanized (also with Environmental Blue and white zinc and Environmental color zinc), nickel plated, black oxide (as shown on the left), etc. |
 A nickel-plated carbon steel turning partMaterial: 12L15 carbon steel Application: This turned part is used as a component of another assembly product of our company to press and fix the riveting function, and the flower tooth on the top is used for the riveting action. Surface treatment: carburizing HV450 + nickel plating + hydrogen embrittlement About the heat treatment of carbon steel turned parts: Our company can provide quenching or carburizing heat treatment according to customer's requirements, and can provide different hardness within HRC50 according to different materials. |
 An environmentally friendly steel cutting iron turning piece, blue zinc plated surface renderingsLeft specifications: 10.0MM outer diameter, 28MM length Material: 12L15 environmental fast cutting iron Surface treatment: 3+Cr environmental protection galvanized Application: This product is used as a shaft or pin. Positioning function, can see more similar pin products |
 A machined part with a side hole tapping teethMaterial: 12L15 green cutting steel Surface treatment: electroplating blue zinc Specifications: Maximum outer diameter 6mm, total length 20MM Features: Middle shaft tapping M3 |
 A simple to extreme steel galvanized turning partFeatures: too simple and featureless The above several quick-cut steel turning parts are representative examples of our company's carbon steel turning parts. More turning parts can be produced according to the user's drawings or samples. Welcome to call or consult us online. |
 Double-threaded, fast-cutting steel-turned parts with inconsistent threads M6 and M5.The flange surface of the large outer circle in the middle section acts as an isolation. Galvanized surface |
